Follett HCE1000A User Manual

HCE1000A, HCE1000W 50Hz Icemakers00141838R02801 Church Lane • Easton, PA 18040, USAToll free (800) 523-9361 • (610) 252-7301Fax (610) 250-0696 • www.f

10Fig. 812316"(407mm)Fig. 9Fig. 10 8. Disconnect coupling as shown (Fig. 8). 9. Using disposable food service grade gloves, insert dry Sani-S

11Fig. 11Fig. 12 11. Reconnect coupling. Press power switch ON. Ice pushes Sani-Sponges through tube (Fig. 11). 12. Place a sanitary (2 gallon or la

12ServiceIcemaker operation (all models)Follett’s icemaker consists of five distinct functional systems covered in detail as follows:• Water system•

13Water systemThe water level in the evaporator is controlled by a feed solenoid and level detecting sensors. Referencing the diagram below, water sen

14Electrical systemNormal control board operationThe PC board indicator lights provide all the information necessary to determine the machine's s

15Test points:The Horizon PC board incorporates on-board test points that can be used to determine various electrical outputs. The test point holes al

16LELE2LOWNORM6HIGHNORMLE3COMLE4ALARMLELOW5LE7LE8CLOGDRAINCOMALARMHIGHWATER LEVELOUT (light on)-V(3 WIRE)+VRETURN(CONTACT CLOSURE)BINFULLS3CLEANMOMS2P

17Compressor dataCompressor current drawAir-cooledAmbient air temp. 60˚F/16˚C 70˚F/21˚C 80˚F/27˚C 90˚F/32˚C 100˚F/38˚C 6.4A 6.4A 6.8A 7.4A 7.6AW

18Mechanical system Evaporator disassembly1. Press PURGE button to purge evaporator, and then turn power OFF.2. Unscrew and remove stream divider as

19Fig. 168. Loosen nut on V-band clamp and remove.9. Remove V-band clamp from front of evaporator.10. Remove main housing as shown.Fig. 1711. Remo

2Follett CorporationEquipment Return PolicyFollett equipment may be returned for credit under the following conditions:1. The equipment is new and un

20Lubewith soaptouchDo notCardboard discFig. 193. Press new mating ring into main housing as shown.4. Lube the shaft with liquid soap in the area sh

21Fig. 2211. Reconnect transport tube to louvered docking assembly.12. Plug sensor in at the electrical box.13. Reconnect vent tube to the shuttle

22Fig. 2520. Remove bolt and reinstall the washer and bolt.Place retainer over bolt and secure with nut and washer.Apply petrol-gelFig. 2621. Lubric

23thermostaticexpansionvalvecompressorHigh pressure vaporHigh pressure liquidLow pressure liquidLow pressure vaporLow sideslrvice porthigh sideservice

24Refrigeration chargeAll service on refrigeration systems must be performed in accordance with all federal, state and local laws. It is the responsib

25“Bin full” detection systemThe Follett Horizon icemaker incorporates a unique “bin full” detection system that consists of the shuttle and actuator.

26TroubleshootingPlease see “Service” section for a description of each function.1. Ice machine is in running condition but not making ice.2. The CP

277. Ice machine is not making ice.Drain clog.8. Ice machine is making ice. Excessive water in bin or coming into bin from transport tube.9. Ice ma

28Replacement partsEvaporator assemblyOrder parts onlinewww.follettice.com8912111037283940233438413329351718183130262324252424272336322313141516131917

29Reference # Description Part #1 Tube, ice transport, molded 001306662 Shuttle assembly (includes 00115600 & 0013066) 001308153 Switch, opti

3Welcome to Follett CorporationSpecifications Operation Cleaning Weekly exterior care Monthly condenser cleaning Semi-annual evaporator cleanin

Air-cooled assembly30Order parts onlinewww.follettice.com121156412387109

31Reference # Description Part #1 Condenser (includes 00130922) 001309142 Shroud, condenser 001309223 Fan motor assembly 001309304 Electrical b

32Water-cooled assemblyOrder parts onlinewww.follettice.com51112131310617181428791516151214311

33Reference # Description Part #1 Electrical box support 001560352 Elbow, water 001294863 Valve, water regulating 001310524 Union, water 20214

34Electrical box126457891031514131211Order parts onlinewww.follettice.com

35Reference # Description Part #1 Cover, electrical box, air/water-cooled 001308722 Board, control circuit, 240V (includes 00130906) 001329023

36Integration kit – top-mount and Satellite-fillOrder parts onlinewww.follettice.com1234561121415 1617131213243349431078

37Reference # Description Part #1 Shuttle actuator 001310292 O ring, ice tube 001238363 Retainer, ice tube 001292704 Nut, ice tube coupling 0

38Skins assembly121821391011356710NSFPHASESINGLEULLURFULL LOAD AMPSMOTOR COMPRESSOR THERMALLY PROTECTEDMAX. BRANCH CIRCUIT FUSE SIZEMIN. BRANCH CIRCUI

39Reference # Description Part #1 Grille, intake 001228462 Front cover, air- & water-cooled (includes 00122846) 001306253 Tubing, water, 1/4

4Welcome to FollettFollett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding after-the-sale

801 Church Lane • Easton, PA 18040, USAToll free (800) 523-9361 • (610) 252-7301Fax (610) 250-0696 • www.follettice.com00141838R0201/07

5FC501060167021802790326016102446596643992041888840382537570219374268964078493868323787473398027878399820372777353730332678308903280036374834070632166

6Dimensions and clearancesEntire front of icemaker must be clear of obstructions/connections to allow removal.1" (26mm) clearance above icemaker

7OperationCleaning and preventive maintenance (all models)Note: Do not use bleach to sanitize or clean the icemaker.Preventive maintenancePeriodic cl

8 2. Mix 1 gallon (3.8L) 120˚F (49˚C) water and 7 ounces (198g) (one 7 ounce packet of Follett SafeCLEAN ice machine cleaner, part# 00132001). Locat

9HI WATERFig. 512Fig. 6Fig. 7 5. Mix 1 gallon 120˚F (49˚C) water and 1.6 ounces (48ml) NU-CALGON IMS-II SANITIZER. Fill until HI WATER light comes o